Matrix Amplification XT1000 Manual do Utilizador descarregar pdf (Página 8)

7 XT SERIES USER MANUAL

(7) Input Signal Sockets

Signal input connections are provided via Female XLR sockets.

Industry standard Balanced XLR format, which helps ensure interference and noise free

connections between equipment.

Ready-made, sensibly priced, quality interconnection leads suitable for use with the amplifier

should be easy to source. However, with sufficient skill, it is possible to make/modify leads for

the task. Proceed to Chapter 5. - “Cables, Making your own”.

(8) Output Mode Selector

STEREO, MONO or BRIDGED (mono) Output can be selected using this switch.

Take care to ensure the correct mode for your application is selected.

● In Stereo mode, channels A and B can be operated independently, when fed

with separate input signals.

● In (parallel) Mono mode, Input A is connected to both amplifier channel A

and B. Input B is not used. Full independent level control over each amplifier

output channel remains possible.

● In Bridged (mono) modes, the input from channel A is fed out of phase to

channel B.

Note: For this mode operation to work as intended, custom wiring must be

used - See Chapter 5.

(9) Power Connection

Mains power is supplied to the amplifier by a standard 20 Amp Powercon mains

socket. An appropriate mains lead is supplied with the amplifier.

Note: The amplifier requires a stable power supply to function as intended. Ensure

that the power source (mains power supply, generator, etc.) is suitable for this

application and adequate power is available. Poorly selected power sources result

in sub-optimal performance, increased likelihood of tripping breakers, blowing

fuses and in extreme situations damage to equipment may occur.

Should the fuse in the mains lead blow for any reason, it must be replaced

with a fuse of the correct rating. This should be 13 amps for the models listed in

this manual. However, if there is any reason to believe that a malfunction caused

the fuse to blow, stop using the equipment immediately and take the amplifier to

an authorised service engineer for servicing.

REV.1.17 MATRIX AMPLIFICATION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Matrix Amplification XT1000 Manual do Utilizador Página 8